Specialized in the design and manufacturing of automatic battery chargers for more than 30 years, CRISTEC is launching high quality battery chargers for the toughest conditions for professional and recreational purposes : HPOWER.
The following models have just been available : HPOWER 24V/45A, 60A & 100A. Other models are planned for Q1/2019 : 12V/90A & 24V/80A.
With CRISTEC HPOWER battery chargers you are assured of unrivalled efficiency, ruggedness, flexibility and battery life increase. Fully AC universal equipped and suitable for every type of battery including Li-Ion, they operate at full power up to 50°C without derating. Internal circuit boards have been specially designed and coated to withstand to adverse environment : heat, humidity and salt air.
A CAN BUS interface is available as well as temperature compensation and remote touch-screen control panel. Some approved models will be also offered.
Brand new battery monitor BAT-MON monitors up to 3 battery banks or power generation (DC source) and 3 additional battery voltages readings.
It shows all relevant data : voltage, current, remaining capacity and time of the house battery and one additional voltage of starter or bow batteries at the same time. It also records history data of your battery.
When there is an on-board generator, BAT MON supervises the battery capacity and controls the generator through one potential free contact.
The best solution to protect your battery against deep discharge, overvoltage, overload. It protects your battery in order to optimize its duration life & provides constant low, high voltage and overload protection. Compliant for any 12 & 24VDC battery type : AGM, gel… Low voltage level can be easily adjusted through external DIP switches. When selected threshold is reached, DC utilizations are automatically disconnected. The system has an integrated buzzer & LED. Standard 2 year warranty.
The YPOWER 12-24V/30A battery charger has been designed to charge a 24V battery bank from a 12VDC power source with a smart 5-step charging curve. Thanks to a charge regulation similar to a standard shore battery charger it matches all battery types : wet and sealed Lead, Calcium Lead, gel, AGM, Lithium, etc.. The most typical case of use is the 24V bow-thruster battery bank charge from the 12V onboard network. However YPOWER 12-24V/30A charger can be used for any type of application thanks to its large scale of use, integrated protections and ergonomics.
Integrated relays or CAN BUS boards The very popular YPOWER chargers are now available with integrated optional boards : relays board or CAN BUS board. The relays board allows two alarms to be transmitted to an external monitoring system through dry contacts (NO and NC) : low battery and charger fault. The CAN BUS interface board allows the charger to communicate with a monitoring system or other peripherals using this mode of communication. Protocol can be made-to-measure on request. YPOWER range : 12V/16A, 25, 40 & 60A; 24V/12A, 20 & 30A
YPOWER-HPOWER CHARGERS & YPOWER SHORE-POWER UNITS After the successful launching of its popular YPOWER chargers CRISTEC now offers a remote control panel as option. Smart, friendly using it has a touch-screen high definition colored screen. It displays information about the charging process while the charger is running, as well as battery supervision when AC network is OFF.
Automatic YPOWER battery chargers Automatic & Autonomous. CRISTEC 5th generation of HF battery chargers: YPOWER range. Innovations : - No cooling fan : for silent operation - Plug and play connection : quick, easy and safe; avoiding the need to open the charger - Advanced 5-step automatic charging curve : extends battery life - Suitable for all battery types - Simultaneously charge 3 battery banks - Un-matched high temperature performance; no de-rating up to +60°C - 3 years warranty - Designed and manufactured in France
PREVENTION OF GALVANIC CORROSION, SAFETY & COMFORT Slow galvanic corrosion not only occurs in metal and aluminium hulls. It can occur in any metallic part being in contact with water : anodes, shafts, propellers, etc. CRISTEC isolation transformers eliminate any electrical continuity between the boat AC on-board network and the shore-side supply 3,6KW model with toroidal transformer to reduce weight and noise. High temperature performance. Integrated soft-start to avoid AC fuse to blow or GFCI to trip because of inrush grid connection. 2 year warranty
CRISTEC ELECTRONIC BATTERY ISOLATORS - RCE RANGE The electronic battery isolators (MOS transistors) prevent the current from flowing from one battery set to another and allow to automatically direct the current of charge to the lowest charged battery. They do not create any voltage drop unlike the usual diode splitters. - Type : MOSFET - Rated current by output : 100, 150, 180 or 200A - Number of inputs : 1 or 2 - Number of outputs : 2 or 3 - Operating in 12V or 24V from any energy source : alternator, eolienne, solar-panel, battery charger ...
Pure sinewave CRISTEC inverters - SOLO range The aim of the inverters is to convert batteries direct voltage into 230VAC/50Hz alternating current. The SOLO inverters deliver a sinusoidal wave identical to mains supply. Their physical characteristics enable a wide scope of applications : marine, mobile, renewable energy, industry. Incoming power : 12, 24 or 48VDC. Output : 230VAC/50Hz. Upon request : 115VAC/60Hz or 230VAC/60Hz. Power : from 200VA to 3500va. Sinusoidal signal. Wall mounted box.
WHO ARE WE? Founded in 1983 in Annecy, CRISTEC (standing for CReation, Innovation Scientifique et TEChnique, or Scientific and Technical Innovation and Creation) specializes in energy conversion. The company is now based in Quimper in Brittany.
CRISTEC belongs to the ENAG group since 1993 and its success is built on its teams and technical means, whose expertise is widely recognized.
In 2014, Henri le Gallais, then CEO of ENAG-CRISTEC group, took over the company, backed by five managers of the company, industrialists and two financial partners.
Our mission: through our know-how and our skills, bring value to all our current and future customers, to help them anticipate and find today the solution to their needs of tomorrow.
CRISTEC offers expertise on an international scale via its range of standard and customized products mainly for on-board applications.
Thanks to our network of agents and distributors who are present in over 50 countries we can guarantee our clients reliable universal solutions for use in extreme environmental conditions.