Gebo Marine Glazing BV

STANDARD DESIGN
For a smoother profile, the frame on our standard hatches has been extended to fit flush against the base mounting. The base mounting screws are covered by the frame for a smoother appearance and extra safety. Deep grooves in the lower frame provide a 100% watertight assembly.

STEPLESS OPENING, TO 180°, PLUS EASY HINGE ADJUSTMENT
Heavy duty friction hinges secure the hatch in any position from ventilation to full 180°. Hinges are also easily adjustable to suit the user.

UNIQUE DEEP-DECK WATER GROOVE
A deep groove in the lower frame keeps water from coming in when the hatch is open.

AIRCO-LOCK 
The Gebo’s unique Airco-Lock theftproof ventilation setting let fresh air in while the crew rest or when the boat is unattended. The hatch is locked from the inside, either in the ventilation or the fully closed position.

SMOOTH DESIGN
For a smoother profile, the frame on our standard hatches has been extended to fit flush against the base mounting. The base mounting screws are covered by the frame for a smoother appearance and extra safety. Deep grooves in the lower frame provide a 100% water-tight assembly.

STEPLESS OPENING, TO 180°, PLUS EASY HINGE ADJUSTMENT
Heavy duty friction hinges secure the hatch in any position from ventilation to full 180°. Hinges are also easily adjustable to suit the user.

UNIQUE DEEP-DECK WATER GROOVE
A deep groove in the lower frame keeps water from coming in when the hatch is open. The Gebo’s unique Airco-Lock theft- proof ventilation setting lets fresh air in while the crew rest or when the boat is unattended. The hatch is locked  from the inside, either in the ventilation or the fully closed position.

There is an increasing demand for sliding hatches. Gebo can offer both standard and customer-specific solutions. Main reason for applying a sliding hatch is:

• more light;
• more visibility during maneuvering (while standing).

Standard sliding hatches are available in three sizes up to a size of 720 x 770 mm.

STANDARD SLIDING HATCH
The profile of this hatch is bended, just like our deckhatches and is suitable for base mounting. Just like our deckhatches and portlights, the sliding hatches are made from finest quality seawater resistant anodised aluminium. Powdercoating of the frame to any RAL color you specify is also available. As standard the hatch is being manufactured with 10 mm grey smoke acrylic. Clear, bronze and green acrylic is available to special order.

BENEFITS

• More light in your interior;
• Fits perfectly with your Gebo windows;
• Safe and scratch-resistant acrylic;
• Standard or custom;
• Seawater-resistant materials (aluminium, plastic and stainless steel);
• Standard suitable for CE-A.

GEBO CUSTOM MADE SLIDING HATCH
This sliding hatch is custom made in our factory and can be delivered with bended or mitred corners. On request Gebo can deliver sliding hatches that fit to the curvature of the roof. These sliding hatches are always supplied with mitred corners. This hard-soldered hatches are pre-curved in the correct curvature and equipped with pre-curved acrylic. The frame is powdercoated in any desired RAL color.

SLEEK DESIGN
The Gebo Round and Delta Flush- line hatches are extremely suitable for mounting on powerboats.
Because of their sleek, low-profile looks these hatches work perfectly with the smooth, flowing lines of today’s boat designs.

Gebo’s ‘FlushLine’ deckhatches offer exciting options for power craft – their sleek, low-profile looks work perfectly with the smooth, flowing lines of today’s boat designs.

THE RIGHT PROFILE IN EVERY DETAIL
With Gebo Flushline hatches, you get the best of everything: a beautiful design and full flexibility in color and finish. Just like our deckhatches and portlights, the Flushline hatches are made from finest quality seawater resistant anodised aluminium. All other parts, including hinges and handles, are also constructed from noncorrosive materials. The sealing is made of silicone rubber. Gebo hatches do not have a single catch, lip or knob for lines or sails to get caught on. For added convenience, optional stays are available for all but the smallest size Flushline hatch.

FIXED WINDSCREEN
The windscreen can be manufactured with three or more panels. The top rail is finished with a rubber section; Cables for lighting and windscreen wipers etc. can be hidden within the top rail and the top rail can be fitted with Tenax fasteners for attaching a hood. The bottom rail can also be made with a longer fixing flange. The length of this flange is 37 mm instead of 16 mm.

Glass thickness: 5 or 6 mm

HINGED TYPE
The bottom rail of each section is fitted with two ‘lift-off’ type hinges which allows the screen to be hinged outward and then removed. This makes passing under low bridges possible. The top rail is finished with a rubber section. The top rail can be fitted with Tenax fasteners for attaching a hood.

Glass thickness: 5 or 6 mm

Gebo responds to the increasing demand for structural glazing to create a flush glass surface. This form of glazing is not only contemporary and professional, it is also functional because it is part of the construction.

TECHNOLOGY
You can choose for directly bonding the glass against the construction or in the grooves made in the hull construction. The glazing is finished with a sealant. Directly bonded against the construction will be the most cost efficient choice. When the glass is glued into a slot, you will have a smooth “flush” result. The glass is fitted after degreasing and applying an adhesive. After this a sealant will be applied to the window. After fitting and drying a sealant will be applied again.

OPTIONS
The possibilities with structural glazing are endless when it comes to design and color. It is also possible to choose for single, insulated, heated or safety glass. We provide you the window that is fully compatible to your needs. Gebo also offers the possibility to expertly install your windows quickly and affordably .

NO MORE CONDENSATION, BUT PRESERVATION
Every boat owner is familiar with the problem of condensation on windows and the consequences of this. On older ships, condensation often leads to mouldy and black wood. Also on modern ships, even when they are provided with  insulating glass, one cannot prevent condensation. Because, even when the glass itself will not quickly condensate, the aluminium frame will still cause considerable moisture, especially at low temperatures.

ISO 12216
The Gebo Thermic Line® marine windows are manu-factured under strict quality standards (ISO 12216) in our own factory in the Netherlands. The window connections for example are not glued but soldered. All windows are made to measure and are carefully tested before delivery. The Gebo Thermic Line windows can be supplied with HR ++ glass or bullet-proof safety glass. Further details on request. Gebo Thermic Line ®

PERFECT ISOLATION
Thanks to thermal insulation between the inner and outer frame of the Gebo Thermic Line® marine windows there is virtually no condensation: visibility is therefore optimal. The perfect insulation not only ensures that the moisture stays outside, but also the heat remains inside.

NEW CONCEPT
The Gebo Light Line is the ‘lighter version of the very successful Gebo Thermic Line® together with the proven Gebo Clamp System, which guarantees a good looking window frame and an easy, fast and secure mounting. Light Line windows are designed for single glass and have no thermal insulation.

Gebo Light Line windows can be delivered with round and mitred corners. All joints of the fixed and hinged windows are being hard soldered for a watertight finish. Gebo Light Line windows are suitable for CE class A-Ocean.

BEAUTIFUL DESIGN
The inner frame is made in one piece and therefore provides a sleek and modern design.

EASY MOUNTING
The windows are fitted by clamping the inner frame onto the back of the outer frame. The inner frame is mounted onto the outer frame by simply screwing the inner rim onto the back of the outer frame by means of M4 screws.

The Gebo Slim Line windows are suitable for CE areas B-C-E. Due to the sleek appearance, the Slim Line windows fit perfectly with the other Gebo marine glazing products.

SMOOTH DESIGN
All joints of the Slim Line windows are hard soldered for a watertight finish. The glass is fitted in a sealant bedding between the outer and inner aluminium frames. The inner rim is fixed with M4 screws to the outer frame. The fastenings in the internal rim are covered by a black  rubber filler strip. As with the Thermic Line windows, the Light Line windows are made with silicone rubber. Unlike EPDM rubbers, silicone rubbers do not dehydrate and for years, they retain their resilience. The Slim Line windows can be delivered with round and mitred corners. The Slim Line Windows are suitable for a glass thickness of 5 mm, 6 mm and 8 mm. Upon request, the Slim Line windows are fitted with insulated glass.

EASY MOUNTING
The windows are fitted by clamping the inner frame onto the back of the outer frame. The inner frame is mounted onto the outer frame by simply screwing the inner rim onto the back of the outer frame by means of M4 screws.