Manage stand orders
Select Option

Axxon Composites SRL

Sos Cristianului, DN 73, Km 5 OP 1, CP 255, 500053 Brasov
Romania
Telephone +40 752 010203
Fax +40 268 257427
sales@axxoncomposites.com

Hall map

boot 2020 hall map (Hall 10): stand G51

Fairground map

boot 2020 fairground map: Hall 10

Our range of products

Product categories

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.10  Deck Equipment / Rig
  • 03.10.03  Masts / Spars / Booms / Rig Manufacturers

Masts / Spars / Booms / Rig Manufacturers

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.10  Deck Equipment / Rig
  • 03.10.04  Rigs / Rigging

Rigs / Rigging

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.10  Deck Equipment / Rig
  • 03.10.17  Mainsail Furling Systems

Mainsail Furling Systems

Our products

Product category: Masts / Spars / Booms / Rig Manufacturers

Mast

Manufacturing of carbon masts is very labor intensive.  AXXON doesn’t make any compromise and most of the components are built in carbon : mast head, sheave boxes, head stay and stay sail attachments with the exception of pins, sheaves and eventually spreaders for which AXXON offers an aluminium option.  Even the aluminium spreaders are optimized in weight with welded tapper and machined end fitting.

AXXON also offers a range of masts with carbon and aluminium track integrated in the profile.

Everything is made for a maximum weight saving.

In this respect, in order to bring even more performance, Axxon is launching the Thin Carbon Layers Technology – TCL®. The new laminating techniques with thin pre-preg layers allow more weight saving and get the possibility to reduce the mast section and windage at the same time, obtaining a carbon mast which is lighter and more aerodynamic.

For the finishing no fairing is needed (weight saving) as the masts cured in female toolings give a perfect smooth finish.

Specifications and options
Specifications and options include a large variety of choices.
It will take too much space to include all of them but you will find enclosed some samples :

Specifications :
  • Head mast, long or short, with or without backstay, with or without 2:1
  • Sheave with spectacle, seagul sheave
  • Head stay with toggle or with lashing
  • Runner tang
  • Spreaders, diamonds
  • Spinnacker ring
  • Goose neck
  • Vang bracket
  • Mast step with or without sheave pin, mast step for lashing block

Options :
  • Electronic bracket 
  • Mast head LED light
  • Hook
  • Carbon spreaders
  • Boomerang carbon spreaders
  • Carbon radar bracket
  • LED deck light
  • Spinnaker pole track
  • Switch track
  • Halyard tensioner
  • Carbon goose neck
  • Foldable mast step
  • Halyard jammer
  • Carbon goose neck
  • Carbon vang bracket
  • Internal or external mast jack

More Less

Product category: Mainsail Furling Systems

Furling mast

AXXON Composites is launching the OST Carbon Furling Mast : the first furling mast manufactured in a single Autoclave curing (One Shot)

The separating partition which will receive the sail is laminated and cured togheter with the mast profile. The lamination of the profile is optimized. This techology, already used to make the foils of the boats from America’s Cup, is a premiere in the furling masts field. Applied to lenghts of more than 30 meters, it required numerous years of research and developement.

Lighter than the existing carbon masts on the market, the weight saving compared to an aluminium mast is between 30% and 40%.

The OST Carbon Furling Mast AXXON improves comfort on the boat : less pitch, less roll. The mast is stiffer, more efficient.

More Less

Product category: Masts / Spars / Booms / Rig Manufacturers

FurlingVBoom

We are ready to install the FurlingVBoom on boats over 60ft and you can choose the version with hydraulic or electric drive (not manual).

More Less

Product category: Masts / Spars / Booms / Rig Manufacturers

V Booms

All booms are built with pre-preg material cured in female toolings, in autoclave at 125° degrees giving a perfect smooth finish.

AXXON manufactures 2 types of V booms : Canoe and Park Avenue.  Very convenient for stocking the main sail, they improve the overall appearance of your boat.

The canoe boom distinguish itself from the Park Avenue through its floor, much lower, which allows to stock the full main sail inside the boom.

The V boom structure is made of three beams of monolithic unidirectional HR carbon fiber linked together with a carbon-foam sandwich.

Equipment
  • Rear carbon sheave box for out haul and 3 reefs
  • Aluminium goose neck anodized with bronze bushing, with 4 sheaves
  • Aluminium vang bracket
  • Reef line dead end on lashing pin
  • 1 padeye for boom topping lift
  • 2 x 3 rope padeyes for lazy-jack
Options
  • Out haul track with 1 out haul car and 3 reef cars
  • Carbon vang bracket
  • Hydraulic out haul
  • Hydraulic Magic trim for main sheet
  • Track for sail cover
  • Bolt rope track for bimini
  • LED cockpit lights
Finish
Two options :  Clear coated  -  Painted in various colors.  Inside non slipping finish

Assembly
All fittings are bonded to the boom to avoid corrosion.

More Less

Product category: Masts / Spars / Booms / Rig Manufacturers

Max Depth boom

All booms are built with pre-preg material cured in female toolings, in autoclave at 125° degrees giving a perfect smooth finish.

Specially designed for racing, AXXON offers a range of carbon core sandwich booms with a maximum depth for a minimum weight

More Less

Product category: Masts / Spars / Booms / Rig Manufacturers

Standard boom

All booms are built with pre-preg material cured in female toolings, in autoclave at 125° degrees giving a perfect smooth finish.

AXXON offers more than 11 different sections for a range of boats up to 80 feet.  

More Less

Product category: Rigs / Rigging

Spinnaker poles

AXXON spinnaker poles are made of pre-preg carbon cured in autoclave, equipped with quick release outboard fitting, internal trip line, socket end fitting and stainless steel pin and toggle.

AXXON manufactures spinnaker poles of the following sizes : 70 – 80 – 90 – 100 – 115 mm

More Less

About us

Company details

The top management of AXXON have an experience for more than 30 years in carbon mast manufacturing and composite industry. The team mastered all the technologies for producing the best masts, booms and rigging.

The quality and performance of a carbon mast and boom depends on its conception but also on its manufacturing process which is very labor intensive. At AXXON the priority is put on the quality and performance needed to satisfy even the most demanding customer who searches for the best product at a reasonable price.

AXXON Composites team is dedicated to engineering, production and marketing of a state of the art carbon fiber masts by using the most advanced technologies : pre-preg carbon, autoclave curing, female tooling manufacturing process. The know-how and the technical expertise combined with the enthusiasm and the experience produce a very competitive and professional team. Together we are unite by the same values of professionalism and quality requirements, in a company that keeps its human dimension.

More Less