PASCOFIX PROFI repair case
Contents: 1x PASCOFIX 20 g, 1x PASCO FILL 20 g, 1x PASCO CLEAN special cleaner 20 ml, 1x PASCO AKTIVATOR 15 ml, 1x PASCO PRIME 15 ml, 1x PASCO REP AQUA 60 g and 1x PASCO REP STAHL 60 g.
PASCO repair professional case for industry, trade, handicraft, household & hobby
With the PASCO repair case you can carry out any kind of repair work and it is used both by professionals (car mechanics workshops, plumbing shops, plumbers, electrical installation companies, boat building companies), but is also for the hobby handyman, in the workshop, motor home, caravan or boat the right all-round set for all repair and maintenance work. Detailed descriptions of the individual products are enclosed. The components contained in the case can be ordered individually in the PASCO Online Shop
The advantages of the PASCO repair professional case are obvious.
All components are in the case and so you always have the right adhesive at hand for every repair.
The annoying search for a component is eliminated.
All adhesives are stored light and heat protected.
The PASCO - case is ideal for every workshop, service and workshop trolley.
Helpful for repairs (emergency repairs) when travelling by car, motorcycle, boat, sports aircraft, camper, caravan and truck.
Products are protected by the hard-shell case
Stable in storage
Can be used everywhere and universally
For industry, trade, craft, household & hobby
In addition, you also save money with the PASCO Profi case.
PASCOFIX industrial adhesive one of the best adhesives for highest demands
Easy and simple handling
Economical in all areas
Ready for immediate use in a flash
No drying in or out
Only one adhesive for almost all materials
No mixing for material combinations
Super strong, storage stable, clean and economical
PASCOFIX industrial adhesive is a high-quality product of modern chemistry. It brings a true sensation in the field of bonding technology. Alpha - cyanoacrylic acid ester is used as the basic material. PASCOFIX industrial adhesive is the result of many years of research and professional production. The quality of the adhesive depends on the degree of distillation. An even higher quality distillation is practically impossible to achieve for technical reasons of production. This explains the almost unlimited combination possibilities for bonding. PASCOFIX also meets the highest demands in terms of elasticity, resistance to cold and heat, and resistance to chemicals. PASCOFIX is absolutely waterproof. Easy processing without mixing components, fast curing even with porous / absorbent materials and an incredible strength of the joints are the outstanding properties of PASCOFIX
PASCOFIX industrial adhesive is suitable for:
Wood, steel, aluminium, brass, copper, porcelain, ceramics, stone, GRP, glass, PMMA, rubber, rigid PVC, leather, ABS, Luran and almost all commercially available plastics with and among each other
PASCOFIX is not suitable for:
Fabric, silicone, teflon, polyethylene and polypropylene. PASCO FILL Filler in combination with PASCOFIX Industrial Adhesive
PASCO FILL Filler in combination with PASCOFIX Industrial Adhesive
PASCO FILL suitable as a filler, in combination with PASCOFIX is used for filling gaps, fillets, holes, joining or closing cracked component joints. Ideally suited for reinforcing repairs with very small bonding areas. PASCO FILLGranulate can be used for all materials such as porcelain, wood, steel, non-ferrous metals, plastics, ceramics, paper, cork, etc. The hardened surface can be mechanically processed (sanding, drilling, filing, milling) is waterproof and can be painted over
PASCO CLEAN special cleaner the all-rounder
PASCO CLEAN is a cleaner containing acetone, which has been precisely matched to our PASCO products and fulfils several functions:
Pre-treatment or degreasing of soiled adhesive surfaces
Removal of excess adhesive
Loosening of joints / adhesions
Removing old adhesive residues
Cleaning of skin and hands
Cleaning / replacing the dispensing tip
The most important thing when bonding is clean surfaces that are free of dust, rust and grease. Therefore we recommend to clean all broken parts with PASCO CLEAN before bonding. Cleaned parts should evaporate for approx. 2 - 3 minutes. Only fresh and clean broken parts do not need to be cleaned
PASCO PRIME and PASCOFIX, the first adhesive that bonds polyolefins and is suitable for the following plastics:
Polyethylene (PE)
Polypropylene (PP)
Teflon (PTFE)
Silicone rubber
termoplastic elastomers (TPE)
PASCO PRIME is a solvent-based pre-treatment agent to improve the adhesive strength of the PASCOFIX special adhesive on non-polar plastic surfaces. PASCO PRIME is particularly suitable for pretreating polyethylene, polypropylene and silicone. With the PASCO PRIME a practical possibility is now offered to realize in a simple way high strengths in the bonding of non-polar plastics with cyanoacrylate adhesives. The low-viscosity primer solution is applied to the difficult-to-bond plastics by dipping, brushing or spraying. After a short evaporation time of the environmentally friendly solvents, a high-strength, age-resistant bond can be made in seconds with the PASCOFIX special adhesive after final curing. The pre-treated surfaces do not have to be bonded immediately; intermediate storage of the activated materials for several hours does not affect the curing
PASCO AKTIVATOR the accelerator for PASCOFIX industrial adhesive
PASCO AKTIVATOR also called accelerator is a chemical to accelerate the bonding process of PASCOFIX industrial adhesive, especially on wood, porcelain, ceramics, clay, stone and all porous materials.
Due to the suction effect of porous materials, it sometimes takes up to one minute or longer for these glued areas to set. The PASCO AKTIVATOR causes the PASCOFIX industrial adhesive to react quickly even with these materials, which are often difficult to join, thus reducing the curing time to a few seconds.
PASCO AKTIVATOR is applied with a brush on one side before bonding and the other side is wetted with our PASCOFIX adhesive. Then join the parts to be bonded together.
When using PASCO AKTIVATOR with PASCOFIX industrial adhesive, a significantly faster and stronger bond is achieved for bonding applications such as porous materials (stone, clay, ceramics, wood, marble, etc.)
PASCO REP Aqua 2 components plasticine 60g. The universal epoxy resin repair compound that has it all
hardens under water
easy to handle
cut - knead - process
always the right mixing ratio
very high strength, extremely resilient
cold and heat resistant (- 40 degrees to approx. 200 degrees Celsius, short-term up to 300 degrees)
resistant to chemicals (acids, alkalis, etc.)
high compressive strength
easy to dose / portion
can be processed mechanically (grinding, drilling, milling, filing and thread cutting)
brushable and paintable
PASCO REP Aqua is a 2 component epoxy resin repair putty. Both components (resin outside and hardener inside) are in the roll. The decisive advantage: you always have the right mixing ratio. PASCO REP adheres to wood, plastics, GRP, polyester, concrete, stone and all metals. PASCO REP is temperature resistant. PASCO REP is resistant to petrol, diesel, alcohol, esters, salt water, oils and most acids and alkalis. PASCO REP contains no solvents and cures with practically no shrinkage. The cured material can be machined (drilled, filed, milled, sanded) and painted or overpainted without pretreatment. Used for sealing water containers, tanks, boilers, water pipes, heating pipes, drainage pipes (sanitary area), swimming pools, GRP and plastic boats (maritime area) and much more
PASCO REP steel 2 component kneading compound 60g. The universal epoxy resin repair compound that has it all
easy to handle
cut - knead - process
always the right mixing ratio
very high strength, extremely resilient
cold and heat resistant (- 40 degrees to approx. 200 degrees Celsius, short-term up to 300 degrees)
resistant to chemicals (acids, alkalis, etc.)
high compressive strength
easy to dose / portion
can be processed mechanically (grinding, drilling, milling, filing and thread cutting)
paintable and recoatable
PASCO REP Stahl is a 2 component epoxy resin repair putty. Both components (resin outside and hardener inside) are in the roll. The decisive advantage : you always have the right mixing ratio. PASCO REP adheres to steel, aluminium, bronze, brass, lead, gold, silver and all metals. PASCO REP is temperature resistant. PASCO REP is resistant to petrol, diesel, alcohol, esters, salt water, oils and most acids and alkalis. PASCO REP contains no solvents and cures with practically no shrinkage. The cured material can be machined (drilled, filed, milled, sanded) and painted or overpainted without pretreatment. Used for sealing boilers, pumps, metal housings, water pipes, heating pipes, exhaust, radiators, radiators, gearbox and engine blocks, oil pans and much more.
More
Less