Manage stand orders
Select Option

Powerdrop Inh. Hödl Johann

Philipsstr. 26, 8403 Lebring
Telephone +43 3182 48824
Fax +43 699 48824

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

boot 2022 hall map (Hall 11): stand E28

Fairground map

boot 2022 fairground map: Hall 11

Our range of products

Product categories

  • 08  Diving
  • 08.01  Diving Gear
  • 08.01.06  Diving Accessories

Our products

Product category: Diving Accessories

PowerDrop Filler 30g

Powerdrop filler is used wherever adhesive alone is no longer sufficient. e.g.: to fill gaps from 0.25mm in a wide variety of materials (e.g.: metal, glass, ceramics, wood, plastic, porcelain, etc.) For repairs such as cracks in water tanks, expansion tanks, radiators, heating-sanitary systems, and many more. (Pressure resistant, waterproof) For filling missing materials e.g.: broken out threads, hinges, holes in laminate parquet, tiles, headlight housings, bumpers, motorcycle fairings (ABS, GRP, PVC, etc.).

Remove oil, grease and other layers (old glue, rust) (with Powerdrop-Remover). Cover the underside with adhesive tape if necessary. Apply Powerdrop adhesive generously and then sprinkle Powerdrop filler on the still wet adhesive. Can be applied in layers (max. 2mm per layer). Curing starts immediately. After 5min. the joint can be sanded, painted or drilled. The repaired area is resistant to water, oil, lye, cold and heat. The repaired area is water, oil, alkali, cold and heat resistant.

More Less

Product category: Diving Accessories

PowerDrop adhesive cleaner and remover, 30ml

Areas of application:
PowerDrop adhesive remover is characterized by its functional safety without attacking the surface. Removes adhesive residues from hands, clothing, upholstery, plastics and painted surfaces.

Apply PowerDrop Remover or Cleaner, leave on for approx. 1-2 minutes and wipe off with a cloth. Repeat if necessary. Loosening of adhesive connections: (e.g.: bathroom hooks): apply PowerDrop Remover or cleaner. Repeat 2-3 times after approx. 5 minutes (capillary effect). Tap lightly with a blunt object until the adhesive joint is loosened. Wipe away residual adhesive with soaked cloth. Also for removing graffiti and felt-tip pen stains. This article may only be used in accordance with the manufacturer's instructions/operating manual. Read the manufacturer's instructions and observe the product or safety data sheet (this can be obtained from our website or by e-mail on request).

More Less

Product category: Diving Accessories

PowerDrop industrial adhesive universal

General info:
PowerDrop adhesives are modified reaction adhesives (cyanoacrylates). They are applied in liquid form and react under suitable conditions to form solids (curing). The cured adhesive is a plastic! The adhesive surfaces harden quickly depending on the material. Smooth ones within a short time (glass, metal, plastic, rubber) - porous ones already after a few minutes (wood, leather, porcelain, ceramics, clay, etc). Different materials can also be bonded without problems. The gap filling capacity is max. 0.25mm. For larger gap width, we recommend PowerDrop fillers.

Fields of application:
Their adhesion to most materials is excellent and the bonding ability under shear and tensile stress is very good. PowerDrop adhesives are largely resistant to water, alkali, oil, grease, UV, light , heat and cold.

As a minimum requirement of the surface treatment we recommend: oil, grease or other layers (old glue, rust, etc) must be removed (with PowerDrop Remover). Apply PowerDrop thinly on one side, press together, dwell for a few seconds and then allow to cure for some time depending on the porous or smooth surface. This article may only be used in accordance with the manufacturer's instructions / operating instructions. For this, read the manufacturer's instructions and observe the product or safety data sheet (This is available on our website or by e-mail on request).

More Less

About us

Company portrait

PowerDrop industrial adhesives
That is quality from Austria

The PowerDrop adhesive was registered as a trademark by Johann Hödl in 2004.

The product has since become known throughout Europe through international trade fairs.

Well-known corporate clients and private customers are enthusiastic about the quality of the PowerDrop products.

The product is distributed through trade fairs and now also through our online shop.